Click on a subject to find out more
Re-fillable spray units and Power-Fill re-fill station
A safer and smarter alternative to traditional aerosols.
- Cost effective alternative to aerosols
- Save money with bulk chemicals
- Easy to use sprayers
- Two convenient sizes available
- Pressurised with air
- No harmful propellants
- Quick and easy to re-fill atomisers
- Reduce empty aerosol can wastage
NSN 6530-66-163-7114 - 750mL Aerosol
The simplest way to use Purasolve EverSafe on a small scale is to fill the canister manually and pressurise with a standard pressurised air supply. Any standard workshop air compressor can be used.
A convenient, cost effective and environmentally friendly alternative to aerosol sprays. Purasolve EverSafe makes using products from bulk containers safe and easy.
Purasolve EverSafe is an aluminium industrial canister fitted with a spray nozzle. The canister is made from one piece of pull drawn aluminium with a chemical resistant anodised finish. Each unit is tested to a minimum of 12bar (175psi) for safety.
The Purasolve EverSafe 750 model has a 750ml capacity. The atomiser comes with an adjustable nozzle which controls the particle size of sprays, from an extra fine mist to a pin stream. The unit is fitted with brass spray nozzles and corrosion resistant working parts.
The Purasolve EverSafe 500 model has a 500ml capacity. It is a slim, convenient size – the same diameter as a standard aerosol can. The Purasolve 500 comes with a replacement valve and an assortment of nozzles including fine, medium, course and pin stream.
Both units can be refilled manually and re-used, or refilled by the Ever-Safe Power-Fill unit.
This unit administers a measured refill and pressurises the EverSafe canister in seconds. The automated EverSafe Power-Fill unit is designed to sit on top of a 200 litre drum, but it also works with a 5 litre and 20 litre drum. The system makes refilling extremely fast and efficient.
Purasolve EverSafe units use compressed air to pressurise chemicals and lubricants, instead of flammable and dangerous propellants. Aerosol cans contain 10-15% propellant by weight, which means wasted money on these harmful substances.
Simply fill the Purasolve EverSafe canister manually and pressurise with a standard pressurised air supply, or fill and pressurise using a Purasolve Power-Fill station. Then use Purasolve EverSafe in the manner of a regular aerosol.
Adjustable nozzles allow for the customisation of the spray stream from mist to pin stream.
Only non-reactive, non-hazardous chemical products are suitable. Units are not recommended for use with paint, acids or products intended to etch or attack metal surfaces.
Refilling is quick and easy. For manual refilling simply unscrew the top and pour in the product.
For automated refilling and pressurising in seconds, use Purasolve Power-Fill. Each unit has chemical resistant seals to avoid leaks and damage over time. The Purasolve Power-Fill can be fitted with a fill monitoring system, such as a swipe card, to record re-fill activity.
Unlike aerosols, Purasolve EverSafe does not use toxic and dangerous chemicals, such as propane and butane, as propellants. Compressed air pressurises the units, so the only thing that is released is the product.
When used with approved safe chemical substitutes and lubricants, Purasolve EverSafe keeps workplaces free of toxic, harmful and dangerous vapours.
The EverSafe canisters are thoroughly tested to withstand six to seven times the pressure of most air compressors, to ensure there is no risk of explosion. The failure rate track record of these units in the field is 0%.
Purasolve EverSafe reduces empty aerosol can waste. Some empty cans may be classified as dangerous and require special disposal.
This solution requires no carbon dioxide, butane or propane propellants which are greenhouses gases that contribute to global warming and smog.